WP6200 Static Dissipative Wipers

…with ANSI/ESD S20.20 ( per ANSI/ESD S11.11 & ANSI/ESD DS11.12 ) 100% knitted polyester No carbon or metal fibers Less than 100 volts tribo-charge Good solvent resistance, lint free

LB9060 ESD Label

…ESD Label printed with “Electrostatic Sensitive Devices Do Not Open or Handle Except At A Static Free Workstationâ€Β The LB9070 yellow paper label comes on a 500 count roll….

CM410 – Single Wire Continuous Monitor, One Operator, One Workstation Mat

…An audible alarm and light will signal a failure. Calibration The CM410 constant monitors are factory calibrated and are designed to be adjustment free. Annual calibration is not necessary. If…

Basic Troubleshooting for the BFN Ionizers

…will be free of defects in material (parts) and workmanship (labor). Within the warranty period, a unit will be tested, repaired or replaced at Transforming Technologies option, without charge. Call…

CM420 – Single Wire Continuous Monitor, Two Operators, One Workstation Mat

…An audible alarm and light will signal a failure. Calibration The CM420 constant monitors are factory calibrated and are designed to be adjustment free. Annual calibration is not necessary. If…

CM410PV – Periodic Verification Tool For CM400 and CM410

…Transforming Technologies’ constant monitors are designed to be adjustment free. Annual calibration is not necessary. If a quality program requires testing, verification tools that simulate a functional and non-functional…

PtecΓ‚β„’ IN3425 AC Ionizing Nozzle

…The IN3425 works efficiently with clean dry air (CDA) and nitrogen (N2) and is capable of 100 psi input. Stable, small and free from EMI, the IN3425 is equipped with…

Translate »